Go to homepage
€0.00*
Show all categories Rogowski RCP series (AC)
Back Show Rogowski RCP series (AC)
    Micsig-RCP300
    Create review

    Micsig RCP120000-XS Rogowski current probe

    Model: RCP12000XS-80
    The Micsig RCP12000XS-80 Rogowski probe supports max 12000 Apk at 30 MHz bandwidth and 1.6mm coil diameter
    Volume discounts on request!

    €949.00 Net

    €1,129.31 incl. VAT

    Shipping country
    Customer Group
    Währung

    Delivery time: 2 weeks

    Content: 1

    Shipping und payment

    Delivery time: 2 weeks

    Model
    Request a quote
    Further information
    Product number: RCP12000XS-80

    Features

    • Coil diameter: 1.6mm
    • Coil length: 80mm
    • Current range 12000A
    • 30 MHz bandwidth

    Documents

    Description

    Product description

    RCP series Rogowski current probes (AC)

    The RCP series Rogowski current probes are high-precision, flexible current probes for contactless measurement of alternating currents in power electronics, development, production and quality assurance.
    They enable the reliable acquisition of highly dynamic current curves up to 12,000 Apk at a bandwidth of up to 30 MHz without significantly influencing the measuring circuit.

    Thanks to the almost zero ohm insertion resistance , the probes are ideal for applications in which conventional current clamps or shunts would distort the measurement result. The flexible Rogowski coil also allows measurements in hard-to-reach places, on individual pins or in cramped assemblies.

    All probes have a standardised BNC output (1 MΩ) and are therefore compatible with almost all oscilloscopes.


    Series overview & areas of application

    RCP-XS series - ultra-compact measurements

    The RCP-XS series is characterised by an extremely small coil cross-section of just 1.6 mm .
    It has been specially developed for pin-level measurements on semiconductors such as MOSFETs and IGBTs (TO-220, TO-247 etc.).

    Typical applications:

    • Measurement of drain and source currents on MOSFETs

    • Double-pulse tests (SiC / GaN)

    • High-frequency switching current analysis

    • Measurements in very narrow assemblies


    RCP-S Series - Universal power electronics

    The RCP-S series is the all-rounder for development and diagnostic tasks in power electronics.
    It combines high bandwidth with robust coil geometry and higher insulation voltage.

    Typical applications:

    • Switch-mode power supplies (SMPS)

    • Converters, inverters, UPS

    • Current measurements in 3-phase systems

    • Analysing load and harmonic currents



    RCP-M series - Increased dielectric strength

    The RCP-M series offers a higher insulation voltage with high bandwidth.
    It is ideal for industrial applications with increased voltage requirements.

    Typical applications:

    • Power modules and industrial converters

    • Development and validation measurements

    • Measurements on power electronics with higher insulation requirements



    RCP-L series - high current & high voltage

    The RCP-L series is designed for large conductor diameters, high voltages and harsh industrial environments .
    With insulation voltages of up to 10 kVpk , it is particularly suitable for energy and grid applications.

    Typical applications:

    • Motor drives

    • Energy and grid analyses

    • High-current measurements in industrial plants

    • Measurement of 50/60 Hz mains currents


    Application notes

    • The cable to be measured should be positioned as centrally as possible in the coil in order to achieve maximum accuracy.

    • Strong external magnetic fields should be avoided to reduce measurement errors.

    • The Rogowski coil can also be used to detect interference or stray fields .

    • Before measuring, ensure that:

      • the oscilloscope is set to 1 MΩ input resistance 

      • the probe is properly supplied with voltage

      • the coil is correctly closed

    Overview RCP Series

    Features

    Further functions

    current-measurement-MOSFET

    Measure the ID current of the MOSFET

    The RCP series probes have excellent high-frequency measurement capabilities, easily handle high-speed signals and rapidly changing current waveforms, and help observe high-frequency harmonic components when measuring the ID current of MOSFETs.

    BNC-Interface

    BNC interface

    The RCP Rogowski series has a standard BNC interface making it compatible with any oscilloscope from any manufacturer.

    Micsig-RCP300-Coil

    Different coil cross-sections

    The cross-sectional diameter of the smallest coil is only 1.6 mm, allowing engineers to measure the current on the hard-to-reach parts of the circuit, for example on chips with narrow pin spacing such as TO-220, TO-47.

    Micsig-RCP300-Applications

    Applications

    • Measurement of current with a mains frequency of 50/60 Hz
    • Measurement of harmonic components in the current
    • Measurement of pin currents in MOSFET or IGBT devices
    • Measurement of load currents and higher-order harmonic currents in power electronics
    • Measurement of current in motor drives and for power quality (VSD, UPS, SMPS)
    • Double-pulse tests for pin currents in SiC and GaN semiconductors

    Specifications

    ParametersRCP-XS SeriesRCP-S SeriesRCP-M SeriesRCP-L series
    Typical coil cross-section1.6 mm3.0 mm4.5 mm8.0 mm
    Available spool circumferences80 mm, 200 mm200 mm, 700 mm200 mm, 700 mm700 mm
    Measurable conductor diameter≤ 20 mm / ≤ 60 mm≤ 60 mm / ≤ 220 mm≤ 60 mm / ≤ 220 mm≤ 220 mm
    Max. Bandwidth30 MHz25 MHz25 MHz10 MHz
    Measuring range (peak current)60 Apk - 12,000 Apk120 Apk - 12,000 Apk120 Apk - 12,000 Apk600 Apk - 12,000 Apk
    Typical accuracy2 %2 %2 %2 %
    Max. Coil insulation voltage1.5 kVpk3 kVpk5 kVpk10 kVpk
    Typical applicationsPin-level measurements,
    MOSFET / IGBT,
    SiC / GaN,
    very tight installation spaces    		Power electronics,
    SMPS, inverters,
    Development & diagnostics    		Industrial applications,
    higher voltages,
    robust measurements    		High current & high voltage,
    Motors, energy,
    Grid & industrial applications

    RCP-L series (typical coil cross-section diameter: 8.0 mm)

    ModelBandwidthPeak currentOutput sensitivityOutput noiseMax. di/dtDroop (%/ms)Output accuracyMax. Coil insulation voltageCoil circumference
    RCP600L-7008 Hz - 10 MHz600 Apk10 mV/A (100×)<18 mVpp70 kA/µs82 %10 kVpk700 mm
    RCP1200L-7006 Hz - 10 MHz1200 Apk5 mV/A (200×)<12 mVpp70 kA/µs52 %10 kVpk700 mm
    RCP3000L-7004 Hz - 10 MHz3000 Apk2 mV/A (500×)<9 mVpp70 kA/µs22 %10 kVpk700 mm
    RCP6000L-7003 Hz - 10 MHz6000 Apk1 mV/A (1000×)<6 mVpp70 kA/µs22 %10 kVpk700 mm
    RCP12000L-7002 Hz - 10 MHz12000 Apk0.5 mV/A (2000×)<5 mVpp70 kA/µs22 %10 kVpk700 mm

    RCP-M series (typical coil cross-section diameter: 4.5 mm)

    ModelBandwidthPeak currentOutput sensitivityOutput noiseMax. di/dtDroop (%/ms)Output accuracyMax. Coil insulation voltageCoil circumference
    RCP120M-20014 Hz - 25 MHz120 Apk50 mV/A (20×)<25 mVpp8 kA/µs182 %5 kVpk200 mm
    RCP300M-2007 Hz - 25 MHz300 Apk20 mV/A (50×)<20 mVpp20 kA/µs82 %5 kVpk200 mm
    RCP600M-2005 Hz - 25 MHz600 Apk10 mV/A (100×)<18 mVpp40 kA/µs52 %5 kVpk200 mm
    RCP1200M-2005 Hz - 25 MHz1200 Apk5 mV/A (200×)<7 mVpp70 kA/µs52 %5 kVpk200 mm
    RCP3000M-2003 Hz - 25 MHz3000 Apk2 mV/A (500×)<7 mVpp70 kA/µs22 %5 kVpk200 mm
    RCP6000M-2002 Hz - 25 MHz6000 Apk1 mV/A (1000×)<5 mVpp70 kA/µs22 %5 kVpk200 mm
    RCP6000M-7003 Hz - 10 MHz6000 Apk1 mV/A (1000×)<6 mVpp70 kA/µs32 %5 kVpk700 mm
    RCP12000M-7002 Hz - 10 MHz12000 Apk0.5 mV/A (2000×)<5 mVpp70 kA/µs22 %5 kVpk700 mm

    RCP-S series (typical coil cross-section diameter: 3.0 mm)

    ModelStrip widthPeak currentOutput sensitivityOutput noiseMax. di/dtDroop (%/ms)Output accuracyMax. Coil insulation voltageCoil circumference
    RCP120S-20014 Hz - 25 MHz120 Apk50 mV/A (20×)<25 mVpp8 kA/µs182 %3 kVpk200 mm
    RCP300S-2007 Hz - 25 MHz300 Apk20 mV/A (50×)<20 mVpp20 kA/µs82 %3 kVpk200 mm
    RCP600S-2005 Hz - 25 MHz600 Apk10 mV/A (100×)<18 mVpp40 kA/µs52 %3 kVpk200 mm
    RCP1200S-2005 Hz - 25 MHz1200 Apk5 mV/A (200×)<7 mVpp70 kA/µs52 %3 kVpk200 mm
    RCP3000S-2003 Hz - 25 MHz3000 Apk2 mV/A (500×)<7 mVpp70 kA/µs22 %3 kVpk200 mm
    RCP6000S-2002 Hz - 25 MHz6000 Apk1 mV/A (1000×)<5 mVpp70 kA/µs22 %3 kVpk200 mm
    RCP6000S-7003 Hz - 10 MHz6000 Apk1 mV/A (1000×)<6 mVpp70 kA/µs32 %3 kVpk700 mm
    RCP12000S-7002 Hz - 10 MHz12000 Apk0.5 mV/A (2000×)<5 mVpp70 kA/µs22 %3 kVpk700 mm

    RCP-XS series (typical coil cross-section diameter: 1.6 mm)

    ModelBandwidthPeak currentOutput sensitivityOutput noiseMax. di/dtDroop (%/ms)Output accuracyMax. Coil insulation voltageCoil circumference
    RCP60XS-8070 Hz - 30 MHz60 Apk100 mV/A (10×)<25 mVpp4 kA/µs652 %1.5 kVpk80 mm
    RCP120XS-8034 Hz - 30 MHz120 Apk50 mV/A (20×)<25 mVpp8 kA/µs352 %1.5 kVpk80 mm
    RCP300XS-8010 Hz - 30 MHz300 Apk20 mV/A (50×)<25 mVpp20 kA/µs92 %1.5 kVpk80 mm
    RCP600XS-808 Hz - 30 MHz600 Apk10 mV/A (100×)<18 mVpp40 kA/µs72 %1.5 kVpk80 mm
    RCP1200XS-805 Hz - 30 MHz1200 Apk5 mV/A (200×)<15 mVpp70 kA/µs32 %1.5 kVpk80 mm
    RCP3000XS-804 Hz - 30 MHz3000 Apk2 mV/A (500×)<8 mVpp70 kA/µs22 %1.5 kVpk80 mm
    RCP6000XS-804 Hz - 30 MHz6000 Apk1 mV/A (1000×)<5 mVpp70 kA/µs22 %1.5 kVpk80 mm
    RCP12000XS-802 Hz - 30 MHz12000 Apk0.5 mV/A (2000×)<6 mVpp70 kA/µs22 %1.5 kVpk80 mm
    RCP300XS-20014 Hz - 20 MHz300 Apk20 mV/A (50×)<20 mVpp20 kA/µs152 %1.5 kVpk200 mm
    RCP600XS-2007 Hz - 20 MHz600 Apk10 mV/A (100×)<18 mVpp40 kA/µs72 %1.5 kVpk200 mm
    RCP1200XS-2005 Hz - 20 MHz1200 Apk5 mV/A (200×)<15 mVpp70 kA/µs32 %1.5 kVpk200 mm
    RCP6000XS-2003 Hz - 20 MHz6000 Apk1 mV/A (1000×)<7 mVpp70 kA/µs32 %1.5 kVpk200 mm
    This website uses cookies to provide the best possible experience. More information ...