Micsig VTO2004 Oscilloscope
The VATO2004 is an automotive oscilloscope & compatible with all Android devices from V10.
€399.00*
Content: 1
Volume discounts on request!
In Stock, Delivery time: 1 - 3 days
Further information
Model
Product number: VATO2004
Features
- Android device required
- 200 MHz bandwidth
- 4 channels
- 1GSa/S sampling rate
- 50Mpts memory depth
Description
The VATO2004 has 4 channels and 200 MHz bandwidth, making it well equipped for simple applications.The Micsig VATO series offers a compact and cost-effective solution for automotive diagnostics, ideal for technicians who need a portable and easy-to-use oscilloscope. Compared to the ATO and SATO series, the specifications of the VATO series are more limited, resulting in reduced bandwidth, a lower sampling rate and fewer advanced features. Nevertheless, the VATO series remains an effective option for basic automotive diagnostic tasks.
A key difference between the VATO series and the higher-end models is the lack of a dedicated screen. Instead, the VATO series is controlled and operated via an external device such as a smartphone or tablet. This reduction to the essentials makes the device particularly compact and lightweight, which makes it ideal for mobile use where space and weight play an important role.
Despite the lower specifications, the VATO series offers basic functions for automotive diagnostics, including the ability to test various sensors and systems in the vehicle. The connection to an external display via USB-C makes it possible to still perform precise measurements, even if the operation is done entirely via the connected device.
Overall, the VATO series strikes a good balance between performance and portability by dispensing with unnecessary extras and focussing on the essential functions that are sufficient for many diagnostic tasks in the automotive sector.
Features
Oscilloscope features
Many trigger functions
Supports Edge, Pulse, Logic, Time Out, Dwart PW, Slope, N Edge and Video.
Serial bus decoding
Supports serial triggering and decoding (I2C, SPI, RS232/UART, CAN, LIN).
Automatic measurements
31 automatic measurements for a wide range of measurement requirements.
50 Mpts memory depth
Enables sampling into a range of the captured signal via touch screen.
Automatic scaling
Automatically adjusts the offset in real time according to the size and frequency of the signal.
High & low pass filter
The filter function helps engineers to exclude insignificant frequencies to eliminate interference and observe the true state of the signal.
Calculation tools
Various tools are available in the form of apps for electronic calculations.
Screen sharing function
the screen content of the oscilloscope can be easily streamed to an external monitor via the built-in HDMI connection.
Remote control
The Micsig STO1000 series has PC software and a mobile phone app (Android/IOS) for remote control via WIFI and USB.
Specifications
| Model specification |  VATO2004 |
|---|---|
| Bandwidth | 200MHz |
| Analogue channels | 4 |
| Rise time | ≤1.8ns |
| Sampling rate | 1GSa/s |
| Memory depth | 50Mpts |
| DC amplification accuracy | ≤ 2% |
| Input impedance | 1MΩ±1% || 14pF |
| Power supply | USB Type-C，DC power |
| Supported tests | Charge/start circuits, sensors, actuators, ignition, networks (CAN L/H, CAN FD, LIN, Flexray, K line), combination tests |
| Battery (optional) | 7.4V、7500mAh lithium-ion battery |
| Dimensions | 140*215*52mm |
| Net weight | 640g |
Accessories
MS-A-B747500
Battery pack for STO series This battery (7500 mAh) is suitable for all devices of the Micsig STO series.
€70.00*
MS-A-001
MS-A-001 BNC to banana cable The Micsig MS-A-001-01 BNC to banana cable is 1.3 meters long.
€15.00*
MS-A-004
MS-A-004 pliers clamps Micsig MS-A-004 Clamp Clamps compatible with all Micsig oscilloscopes.
€16.00*
MS-A-005
MS-A-005 Multimeter Probe The Micsig MS-A-005 multimeter probes are compatible with all Micsig oscilloscopes.
€16.00*
MS-A-006
MS-A-006 Insulated Alligator Clip (Large) The Micsig MS-A-006 Insulated Crocodile Clamps are compatible with all Micsig oscilloscopes
€16.00*
MS-A-007
MS-A-007 test needle The Micsig MS-A-007 test probes are compatible with all Micsig oscilloscopes.
€15.00*
MS-A-008
MS-A-008 automotive ignition probe The Micsig MS-A-008 probe is a set for measuring malfunctions in motors.
€45.00*
MS-A-009
MS-A-009 Flexible piercing needle The flexible Micsig MS-A-009 test probes are compatible with all Micsig oscilloscopes .
€15.00*
MS-A-010
MS-A-010 Multimeter Pen The Micsig MS-A-010 multimeter pens are compatible with all Micsig oscilloscopes.
€15.00*
MS-A-011
MS-A-011 alligator clips (small) The Micsig MS-A-011 alligator clips are suitable for the Micsig Tablet Oscilloscopes.
€15.00*
MS-A-012
MS-A-012 test hook needle The Micsig MS-A-012 test hook needles are suitable for the Micsig Tablet Oscilloscopes.
€20.00*
P130A
P130A 200MHz passive probe This passive 200 MHz probe is suitable for all Micsig oscilloscopes.
€50.00*
OP10-1G
SigOFIT OP10-1G Attenuation tip (10X | 1 GHz ) The OP10-1G is a 10X attenuation tip with 1 GHz bandwidth for the Micsig SIGOFIT fibre optic isolated series.
Product is discontinued
OP10-2
SigOFIT OP10-2 Attenuation tip (10X | 200 MHz ) The OP10-2 is a 10X attenuation tip with 200 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
Product is discontinued
OP10-3
SigOFIT OP10-3 Attenuation tip (10X | 300 MHz ) The OP10-3 is a 10X attenuation tip with 300 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
Product is discontinued
OP10-5
SigOFIT OP10-5 Attenuation tip (10X | 500 MHz ) The OP10-5 is a 10X attenuation tip with 500 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
Product is discontinued
OP100-1G
SigOFIT OP100-1G Attenuation tip (100X | 1 GHz ) The OP100-1G is a 100X attenuation tip with 1 GHz bandwidth for the Micsig SIGOFIT fibre optic isolated series.
Product is discontinued
OP100-2
SigOFIT OP100-2 Attenuation tip (100X | 200 MHz ) The OP100-2 is a 100X attenuation tip with 200 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
Product is discontinued
OP100-3
SigOFIT OP100-3 Attenuation tip (100X | 300 MHz ) The OP100-3 is a 100X attenuation tip with 300 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
Product is discontinued
OP100-5
SigOFIT OP100-5 Attenuation tip (100X | 500 MHz ) The OP100-5 is a 100X attenuation tip with 500 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
€1,280.00*
OP1000-1G
SigOFIT OP1000-1G Probe tip (1000X | 1 GHz) The OP1000-1G is a 1000X attenuation tip with 1 GHz bandwidth for the Micsig SIGOFIT fibre optic isolated series.
€899.00*
OP1000-2
SigOFIT OP1000-2 probe tip (1000X | 200 MHz) The OP1000-2 is a 1000X attenuation tip with 200 MHz bandwidth for the Micsig SIGOFIT fibre optic isolated series.
Product is discontinued
OP1000-3
SigOFIT OP1000-3 probe tip (1000X | 300 MHz) The OP1000-3 is a 1000X attenuation tip with 350 MHz bandwidth for the Micsig SIGOFIT fibre optic isolated series.
€299.00*
OP1000-5
SigOFIT OP1000-5 probe tip (1000X | 500 MHz) The OP1000-5 is a 1000X attenuation tip with 500 MHz bandwidth for the Micsig SIGOFIT fibre optic insulated series.
Product is discontinued